| ||
|
|
| |
| FAQ(s) found under Troubleshooting | Showing 7 Of 21 | Prev | Next |
| Can you send SMS\Text messages using CDMA on Verizon using AT-Commands? | |||||||||
| |||||||||
Yes you can please see the CDS-9060 rev F manual --
SMS FOR THE CDS-9022 AND CDS-9060 SERIES CELLULAR MODEMS
To initiate from 1 to 20 SMS messages:
AT+CMGS=(enter e-mail address or a Mobile number here), enter "using any terminal program"
> prompt will appear on the screen. At the < prompt enter the desired SMS message. The message length may be up to 170 characters/bytes long. This total includes the previously entered e-mail address.
After delivery of the SMS message you will see the prompt:
+CMGS:11
OK
To send more messages re-enter:
AT+CMGS=<enter e-mail address or phone number here>
<enter>
The following are the commands that may be used in conjunction with SMS. They are based on the standard GSM command set.
+CMGD Delete message from storage
AT+CMGD=<index><CR>
This command deletes the stored message at location <index>. Note that the index values change whenever a new message is received, sent or deleted. A valid way to perform a series of deletes is to delete the highest numbered index first.
|
| Submit Questions / Post Inquiries |
| If your question have not been answered, or if you would like to send us an inquiry, please click here |
| Most Popular Questions |
| • When is Analog Cellular going away???? Replace your Analog Cellular Data unit’s before it’s too late! ... Views : 12017   Last Update : 2007-08-08 |
| • I received "No Carrier" after dialing ATDT+Phone Number within 4 seconds, what does that mean? Check with your CDMA Provider to "make sure that your number is provisioned correctly. ... Views : 7413   Date Add : 2007-03-29 |
| • CDS-9022\9060 has 16 pin header. I need to know how to get the cryout SMS\Email alarms working, which pins are inputs and which are outputs. thank you in advance. Pin-out 9022 P7 \ 9060 P2 1 = Input 0 2 = GND 3 = Input 1 &n... Views : 7345   Last Update : 2007-03-14 |
| Latest Added FAQs |
| • I'm Programming a CDS-9060 with a SPRINT # and the MDN is different then the MIN. Ever time I tell it to program it defaults back to the MIN. Why is this happening and is there a fix? For some reason when programming some Sprint numbers that have 2 different numbers for the MIN and M... Views : 2377   Date Add : 2008-06-13 |
| • How do I test the CDS-9060-TR to make sure the internal modem and local loop is working properly? The attached file will test the RJ-11 Tip and Ring function and the internal Analog modem. &nbs... Views : 2259   Date Add : 2007-05-29 |
| • Does the CDS products have Modem Emulation mode for spoofing software? Modem Emulation mode -The CDS modems act like a Dialup\Dial-outbound standard Hayes AT-Compatib... Views : 5696   Last Update : 2007-10-13 |


| Browse by Category | |
| Setup & Configuration (29) Setting up and configuring your DataRemote Modems | |
| Troubleshooting (21) Troubleshooting your DataRemote Modems. | |
| Tutorials (2) Tutorials for setup and configuration of your DataRemote Wireless Modems. | |
| Terminology (4) Commonly used terms associated with the Cellular Industry | |