DataRemote Technical Support & Knowledgebase

Home > Setup & Configuration

Search Knowledgebase

Jump to Category

Sub-categories

SETUP (0)
You can find FAQ on how to use AT commands, IP How to have the CDS always log on using a Mobile IP perfered "MIP" programming telephone # for all models . Good source to find options and understanding SMS messaging used for industrial controls application. Understanding CDMA Always on connection and dial-up connection.

FAQ(s) found under Setup & Configuration

Showing 20 Of 29

Prev | Next

What is the Pin-Out for the CDS modems DB-9?

Part# DRA-RS232

Last Update : 2007-06-05

Printer Version

Tell A Friend

Email Link To Me

Pin-Out for the CDS modems DB-9 Wiring diagram. The CDS is wire as a DCE device. When wiring a DCE to DTE its pin to pin. If you don’t want to solder your cable please see our DB-9 to terminal block converter Part# DRA-RS232

SerialPort Pinouts
DB-9 (9 pin) pin assignments

DB-9 Pin

Signal

Function

1

CD

Carrier Detect

2

RD

Receive Data

3

TD

Transmit Data

4

DTR

Data Terminal Ready

5

SG

Signal Ground

6

DSR

Data Set Ready

7

RTS

Request To Send

8

CTS

Clear To Send

Note: when using a 3 wire connection with the CDS units you don’t need to add jumpers or add AT-Commands. The CDS will automatically use NO FLOW CONTROL.

Your Rating :

Related FAQs In This Category

• I�m using the CDS-9060 hook via RS-232 to a PLC I call into the unit from a landline modem. I want to know if the CDS-9060 Cellular modem has AT-Commands that can be used to LOG onto the internet in TCP or UDP mode? I�m wanting to dial from a host computer into a IP address\CDS modem Communicating to a PLC\RTU .

Thanks in advance,
Bill Thornwhite
Control Systems
Richmond, TX

• What is the normal baud rate of data transmission with all alternative rates
available?

Submit Questions / Post Inquiries

If your question have not been answered, or if you would like to send us an inquiry, please click here

Most Popular Questions

• When is Analog Cellular going away????
Replace your Analog Cellular Data unit’s before it’s too late! ...
Views : 12018 Last Update : 2007-08-08

• I received "No Carrier" after dialing ATDT+Phone Number within 4 seconds, what does that mean?
Check with your CDMA Provider to "make sure that your number is provisioned correctly. ...
Views : 7413 Date Add : 2007-03-29

• CDS-9022\9060 has 16 pin header. I need to know how to get the cryout SMS\Email alarms working, which pins are inputs and which are outputs. thank you in advance.

Pin-out 9022 P7 \ 9060 P2 1 = Input 0 2 = GND 3 = Input 1 &n...
Views : 7347 Last Update : 2007-03-14

Latest Added FAQs

• How do I find pin 1 for the I/O Pigtail cable?
Pin 1 is noted on the diagram below, Pin 1 on the 9060 is the top right pin -- Diagram -- ...
Views : 16 Date Add : 2010-09-01

• How do I setup IP-COM \ IP-Manager ComPort Redirector Software for Windows. Converts modem applications to work over TCP/UDP/IP network.

VirtualComm IP Manager. This innovative software can communicate seamlessly with old communications software and divert data out of a virtual serial port rather than through the traditional physical serial port. This virtual serial port emulates the physical communication port and provides a digital gateway to the internet�all without requiring any modification to the existing software codes or other equipment. The VirtualComm IP Manager works as a circuit-switched call, but is actually internet based.
See how it works http://76.12.35.241/dataremote/ipmanager/ipmanager.html Features ...
Views : 1966 Last Update : 2008-08-14

• Hi, I require a CDMA modem to run off 24VDC and be used in remote applications where a serial interface is required. Most importantly, I need the modem to be compatible with the following serial port parameters - Baud 115200, Data Bits 7, Par ity Even and 1 stop bit. Please let me know which modem will allow this. Thanks in advance. M2M text messaging using Data Bits of 7,E,1 @ 115200bps
Yes our modem does everything your asking for! Please look at the CDS-9060 http://www.datarem...
Views : 2307 Date Add : 2008-06-04

Technical Support

Warranty & Return Policy

	Download User Manuals
	Download Software & Drivers.
	Contact Technical Support
	Browse Our Online Store

Browse by Category
	Setup & Configuration (29) Setting up and configuring your DataRemote Modems
	Troubleshooting (21) Troubleshooting your DataRemote Modems.
	Tutorials (2) Tutorials for setup and configuration of your DataRemote Wireless Modems.
	Terminology (4) Commonly used terms associated with the Cellular Industry