DataRemote Technical Support & Knowledgebase

Home > Setup & Configuration
Search Knowledgebase	Jump to Category Setup & Configuration  -- SETUPTroubleshootingTutorialsTerminology
Sub-categories SETUP (0) You can find FAQ on how to use AT commands, IP How to have the CDS always log on using a Mobile IP perfered "MIP" programming telephone # for all models . Good source to find options and understanding SMS messaging used for industrial controls application. Understanding CDMA Always on connection and dial-up connection.

FAQ(s) found under  Setup & Configuration

Showing 15 Of 29

Prev  |  Next

---

What is the normal baud rate of data transmission with all alternative rates available?

Views : 2235  Printer Version   Tell A Friend   Email Link To Me

The supported baud rates are: 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200 Note: 19200 is the default baud rate from the factory

---

Your Rating :

Very GoodGoodQuite SlightlyNot Related

Related FAQs In This Category

• How do you get into the setup Menu's to program the CDS Modem?

• Hi, I require a CDMA modem to run off 24VDC and be used in remote applications where a serial interface is required. Most importantly, I need the modem to be compatible with the following serial port parameters - Baud 115200, Data Bits 7, Par ity Even and 1 stop bit. Please let me know which modem will allow this. Thanks in advance. M2M text messaging using Data Bits of 7,E,1 @ 115200bps

Submit Questions / Post Inquiries

If your question have not been answered, or if you would like to send us an inquiry, please click here

Most Popular Questions

---

• When is Analog Cellular going away????    Replace your Analog Cellular Data unit’s before it’s too late!      ...    Views : 12006       Last Update : 2007-08-08

• I received "No Carrier" after dialing ATDT+Phone Number within 4 seconds, what does that mean?    Check with your CDMA Provider to "make sure that your number is provisioned correctly.   ...    Views : 7403       Date Add : 2007-03-29

• CDS-9022\9060 has 16 pin header. I need to know how to get the cryout SMS\Email alarms working, which pins are inputs and which are outputs. thank you in advance.       Pin-out 9022 P7 \ 9060 P2 1 = Input 0    2 = GND  3 = Input 1 &n...    Views : 7341       Last Update : 2007-03-14

Latest Added FAQs

---

• How do I find pin 1 for the I/O Pigtail cable?    Pin 1 is noted on the diagram below, Pin 1 on the 9060 is the top right pin -- Diagram --  ...    Views : 15       Date Add : 2010-09-01

• How do I setup IP-COM \ IP-Manager ComPort Redirector Software for Windows. Converts modem applications to work over TCP/UDP/IP network. VirtualComm IP Manager. This innovative software can communicate seamlessly with old communications software and divert data out of a virtual serial port rather than through the traditional physical serial port. This virtual serial port emulates the physical communication port and provides a digital gateway to the internet—all without requiring any modification to the existing software codes or other equipment. The VirtualComm IP Manager works as a circuit-switched call, but is actually internet based.    See how it works http://76.12.35.241/dataremote/ipmanager/ipmanager.html   Features ...    Views : 1961       Last Update : 2008-08-14

• Hi, I require a CDMA modem to run off 24VDC and be used in remote applications where a serial interface is required. Most importantly, I need the modem to be compatible with the following serial port parameters - Baud 115200, Data Bits 7, Par ity Even and 1 stop bit. Please let me know which modem will allow this. Thanks in advance. M2M text messaging using Data Bits of 7,E,1 @ 115200bps    Yes our modem does everything your asking for! Please look at the CDS-9060  http://www.datarem...    Views : 2305       Date Add : 2008-06-04