Pin-out 9022 P7 \ 9060 P2

1 = Input 0

 2 = GND

 3 = Input 1

 4 = Input 2

 5 = Input 3      Cry-out alarm  SMS 1  “Active Low”

 6 = Input 4

 7 = VCC  “Do Not use”

 8 = Input 5       CRY-out Alarm 2 “Active Low”

 9 = Output 0

10 = N/A

11 = Output 1

12 = Output 2

13 = Output 3

14 = Output 4

15 = Output 5

16 = GND -  

 I/O connector, Input 3 [pin 5] and Input 5 [pin 8] is momentarily shorted for at least 1 seconds to GND, the modem automatically switches to SMS mode and delivers the message, and then switches back to data mode. Please note that there are time durations of approximately 20 seconds that occur while switching from data to SMS modes and back again.

Sample -

**************  ALARM SETUP MENU  *************

  A - SMS Address 1         :  8056601276
  B - SMS Address 2         :  support@dataremote.com
  C - SMS Address 3         :  oncall@dataremote.com
  D - SMS Address 4         :  8053399739
  E - SMS Address 5         :  8052741771
  F - SMS Address 6         :  miguel.c@dataremote.com
  G - Alarm Message for 1-3 :  Site 9914 Generater ON
  H - Alarm Message for 4-6 :  No AC Power backup battery switch on
  I - PPP Connect Number    :  #777
  J - PPP User Name         :  8052179390@vzw3g.com
  K - PPP Password          :  vzw
  L - TCP/UDP mode,addr,port:  UDP,206.72.84.165,1000
  M - TCP/UDP CD timeout    :  CD always ON
  N - Local (fixed) IP      :  166.139.99.93
  O - Refresh time,port     :  TCP/UDP Refresh OFF
  P - Modem Emulation       :  ON
  Q - Main Menu Password    :
  R - Return to Main Menu
  X - Exit to Terminal Mode

  Select Option: