DataRemote Technical Support & Knowledgebase

Home > Setup & Configuration

Search Knowledgebase

Jump to Category

Sub-categories

SETUP (0)
You can find FAQ on how to use AT commands, IP How to have the CDS always log on using a Mobile IP perfered "MIP" programming telephone # for all models . Good source to find options and understanding SMS messaging used for industrial controls application. Understanding CDMA Always on connection and dial-up connection.

29 questions found in 'Setup & Configuration'

Showing 1-2 Of 29

• Does The Modem Require Any Special Drivers?
No drivers are required for command interface to the modem....
Views : 3493 Date Add : 2007-03-13

• How do I program my modem?
You need to use a terminal type of program like Terminal For Windows or HyperTerminal. On the setup ...
Views : 3828 Date Add : 2007-03-13

Most Popular Questions

• When is Analog Cellular going away????
Replace your Analog Cellular Data unit’s before it’s too late! ...
Views : 11954 Last Update : 2007-08-08

• I received "No Carrier" after dialing ATDT+Phone Number within 4 seconds, what does that mean?
Check with your CDMA Provider to "make sure that your number is provisioned correctly. ...
Views : 7383 Date Add : 2007-03-29

• CDS-9022\9060 has 16 pin header. I need to know how to get the cryout SMS\Email alarms working, which pins are inputs and which are outputs. thank you in advance.

Pin-out 9022 P7 \ 9060 P2 1 = Input 0 2 = GND 3 = Input 1 &n...
Views : 7317 Last Update : 2007-03-14

Latest Added FAQs

• How do I find pin 1 for the I/O Pigtail cable?
Pin 1 is noted on the diagram below, Pin 1 on the 9060 is the top right pin -- Diagram -- ...
Views : 10 Date Add : 2010-09-01

• How do I setup IP-COM \ IP-Manager ComPort Redirector Software for Windows. Converts modem applications to work over TCP/UDP/IP network.

VirtualComm IP Manager. This innovative software can communicate seamlessly with old communications software and divert data out of a virtual serial port rather than through the traditional physical serial port. This virtual serial port emulates the physical communication port and provides a digital gateway to the internet�all without requiring any modification to the existing software codes or other equipment. The VirtualComm IP Manager works as a circuit-switched call, but is actually internet based.
See how it works http://76.12.35.241/dataremote/ipmanager/ipmanager.html Features ...
Views : 1948 Last Update : 2008-08-14

• Hi, I require a CDMA modem to run off 24VDC and be used in remote applications where a serial interface is required. Most importantly, I need the modem to be compatible with the following serial port parameters - Baud 115200, Data Bits 7, Par ity Even and 1 stop bit. Please let me know which modem will allow this. Thanks in advance. M2M text messaging using Data Bits of 7,E,1 @ 115200bps
Yes our modem does everything your asking for! Please look at the CDS-9060 http://www.datarem...
Views : 2291 Date Add : 2008-06-04

Technical Support

Warranty & Return Policy

	Download User Manuals
	Download Software & Drivers.
	Contact Technical Support
	Browse Our Online Store

Browse by Category
	Setup & Configuration (29) Setting up and configuring your DataRemote Modems
	Troubleshooting (21) Troubleshooting your DataRemote Modems.
	Tutorials (2) Tutorials for setup and configuration of your DataRemote Wireless Modems.
	Terminology (4) Commonly used terms associated with the Cellular Industry